Page 1
21. On-grade indicator 10. LCD display 22. Beeper indicator 11. Beeper 23. Accuracy indicator 12. Battery cover 24. Battery indicator 13. Type plate with serial number 14. Fixing thread of the clamp MANUAL 150.40.M – QUATTRO MM [EN] V1.0 – 05.2022 |...
Page 2
When the device is switched on, it starts in the operating mode used before it was switched off last time. • if in line laser mode, the device detects only the line laser color which is first detected after switching on the device MANUAL 150.40.M – QUATTRO MM [EN] V1.0 – 05.2022 |...
Page 3
When the laser beam is outside of allowed area (10 and +10 mm), you hear one beep sound and text § ‘E30’ appears on Numeric digits/text display[19]. This means user defined on-grade level fails. Reset user defined on-grade level to default § MANUAL 150.40.M – QUATTRO MM [EN] V1.0 – 05.2022 |...
Page 4
InF - Device Information Find Information about Firmware Version (Fw), Device Code (dc) and Serial Number (Sn) here. Note: All menu settings will be retained when the device is turned off MANUAL 150.40.M – QUATTRO MM [EN] V1.0 – 05.2022 |...
Need help?
Do you have a question about the 150.40.M and is the answer not in the manual?
Questions and answers