1.Introduction Z308, a wearable presence tag, acts as an IAS device for minor children/aged-care use. It is an ideal product to detect one’s presence within/ out of the network coverage for safety purpose. Z308 periodically sends presence/absence report to keep a close watch on those who wear it. Z308 also works as an emergency button.
2.Appearance Indicator (Red Green Panic Button 3. Features Fully IEEE 802.15.4 compliant Utilizes 2.4GHz ISM band; up to 16 channels IP Rating: IP52 Power supply: 1 x CR2450 3.0V battery Communication transmission is up to 210 meters linear distance in open field ...
5.Setting up Z308 5-1. Power On Without external power supply, the product uses internal 3V button battery for power supply. Step1. Open the battery back cover Step2. Take a CR2450 button battery, put the negative pole upward into the battery base Step3.
Step5. When Z308 can not join a network in 3 minutes, it will go into off mode. To ask for joining Network again, press and hole button for 3 seconds. After joining a network, Z308 would try to enroll in the ZigBee security system. Please make sure Z308 and CIE (Control and Indicating Equipment) device have enough power.
5-6. Wake Up Z308 When users would like to setup or acquire data from the device which is in sleeping mode, we have to wake up the device as the following steps: Step1. Press and hold the Panic Button for 3 seconds. Release the button when the indicator flashes red once.
Page 9
Values of the ZoneStauts payload ZoneStatus Meaning Values Attribute Bit Number 1 – opened or alarmed Alarm1 0 – closed or not alarmed 1 – opened or alarmed Alarm2 0 – closed or not alarmed 1 – Tampered Tamper 0 – Not tampered 1 –...
In a security system, it is important that Zone devices report the conditions to the central security unit (the CIE device). To meet this need, Netvox came up with a technique called “HeartBeat”. Right after Z308 enrolls to a security system, it sends a HeartBeat signal to the CIE device. Afterward, it will send HeartBeat data every hour by default settings.
Function of indicating remaining battery power: In the zone status change notification alarm command sent by Z308 to CIE, the percentage value of the remaining battery power is placed in the high byte of zone status. CIE can understand the battery power of Z308 after receiving it.
6. Home Automation Clusters for Z308 A cluster is a set of related attributes and commands which are grouped together to provide a specific function. A simple example of a cluster would be the On/Off cluster which defines how an on/off switch behaves.
Page 13
Unsigned 0x00 – 0x0003 HWVersion Read only 0x02 8-bit integer 0xff Manu Character 0 – 32 0x0004 facturer Read only netvox string bytes Name Model Character 0 – 32 0x0005 Read only Z308E3ED Identifier string bytes Character 0 – 16...
0x000… BatteryAlarm 0x003e Read State Bitmap 7. Related Netvox Devices Z201B: ZigBee HA Coordinator with CIE 8. Important Maintenance Instructions • Please keep the device in a dry place. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits.
9. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.