Restore To Factory Setting; Offline Activation - netvox ZigBee Z308 User Manual

Function of indicating remaining battery power:
In the zone status change notification alarm command sent by Z308 to CIE, the percentage value of the
remaining battery power is placed in the high byte of zone status. CIE can understand the battery power
of Z308 after receiving it.

5-11. Restore to Factory Setting

To restore it to factory setting, please follow the steps:
Step1. Press and hold the Panic Button or 15 seconds.
Step2. Release the button after the indicator shows fast red flashes.
Step3. After 10 red flashes, it will go into turn-off mode. The indicator will be Off.

5-12. Offline Activation

If Z308 disconnecting from the network, it will wake up every 5 minutes to try re-joined the network.
It also can manual trigger Z308 to re-join the network in the following two ways.
1. Press the panic button 3 seconds and red indicator flash once than device would try re-joined
network.
2. Press the panic button once to alarm and device would try re-joined network.
10