Table of Contents
Advertisement
5-6. Wake Up Z308
When users would like to setup or acquire data from the device which is in sleeping mode, we have to
wake up the device as the following steps:
Step1. Press and hold the Panic Button for 3 seconds. Release the button when the indicator flashes
red once.
Step2. The indicator flashes green 5 times when Z308 is online.
Step3. Z308 will broadcast the device data to the ZigBee network.
Z308 would be in active status for 2 minutes for communication.
5-7. Panic Button
Z308's Zone Type: Key Fob (ID: 0x0115)
The value of Alarm2 is 1 when sending alarm message.
Under the circumstances that Z308 has enrolled to the security system, it will send the alarm message
to the command center (and the bound devices with ID: 0x0500) after pressing the Panic Button. The
Warning Device will send out alarm sound or lighting alert for immediate help.
Under the circumstances that Z308 hasn't enrolled to the security system, it will try enroll in a
security system after pressing the Panic Button. After the enrollment, Z308 will send the alarm
message to the command center.
ZoneStatusChange commands: 0x00.
The command list:
Bits: 8
Transaction
Frame
control
0x09
(ClusterID: 0x 0500)
8
Command
Sequence
identifier
number
8
16-Bit Enumeration
0x00
ZoneStatus
7
var
Frame payload
8-Bit Enumeration
ExtendedStatus
Advertisement
Table of Contents
