Table of Content 1. Introduction ................................2 2. Appearance ................................3 3. Main Features ................................3 4.Set up Instruction ..............................4 5. Data Report ................................5 6. Installation and Precaution ............................7 7. Important Maintenance Instruction .......................... 8...
1. Introduction R602A is a long-range wireless alarm device for Netvox ClassC type devices based on the LoRaWAN open protocol, compatible with the LoRaWAN protocol. The R602A has five kinds of alarm sounds - fire/ emergency / burglar / doorbell /mute mode.
2. Appearance Alarm Indicator*6 Network Indicator Function Key Function Key DC in 3. Main Features Compatible with LoRaWAN 12V DC power supply Simple operation and setting Five types of alarm sounds and different ways of flashing lights, and can be controlled separately ...
The network indicator will flash once and it will send a data report. Remote Control The R602A can be controlled by sound and light alarms, and there are five alarm sounds that can be controlled are as follows: 1. Fire Mode 2.
Maximum time: 3600s Minimum time: 3600s (Mintime and Maxtime must be set to the same report time.) The reported data is decoded by the Netvox LoRaWAN Application Command document and http://www.netvox.com.cn:8888/page/index Data report configuration and sending period are as following:...
Page 7
Parallel to Warning, 0x03_Doorbell, (2bytes,Unit:1s) Fixed 0x00) 0x02_ LedBlinkMode2 0x04_MuteMode in Parallel to Warning Other Value is Reserved ConfigReportRe MinTime MaxTime Reserved R602A 0x69 0x01 (2bytes Unit:s) (2bytes Unit:s) (5Byte,Fixed 0x00) ConfigReportRs Status Reserved 0x81 (0x00_success) (8Bytes,Fixed 0x00) ReadConfig...
Do not install the device in a metal enclosure or other LED light function: flowing light, blink and unlighted electrical equipment around it to avoid affecting the wireless transmission of the device. R602A can be applied to the following scenarios: 1.Family 2.Engine room 3.School 4.Mining plant site...
7. Important Maintenance Instruction Kindly pay attention to the following in order to achieve the best maintenance of the product: • Keep the device dry. Rain, moisture, or any liquid, might contain minerals and thus corrode electronic circuits. If the device gets wet, please dry it completely.