netvox Z309 User Manual
  1. Manuals
  2. Brands
  3. netvox Manuals
  4. Security System
  5. Z309
  6. User manual

netvox Z309 User Manual

Wireless wearable presence tag with emergency button and inactivity detection
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Model: Z309
Wireless Wearable Presence Tag with Emergency Button and Inactivity Detection
Wireless Wearable Presence Tag
with Emergency Button
and Inactivity Detection
Z309
User Manual

Advertisement

Table of Contents
loading

Related Manuals for netvox Z309

Summary of Contents for netvox Z309

  • Page 1 Model: Z309 Wireless Wearable Presence Tag with Emergency Button and Inactivity Detection Wireless Wearable Presence Tag with Emergency Button and Inactivity Detection Z309 User Manual...

  • Page 2: Table Of Contents

    4-13 Specify the Functions of the CIE ..................14 4-14 Indication of Remaining Battery Power ................14 4-15 Sleeping Mode ........................15 4-16 Home Automation Clusters for Z309 .................. 15 4-17 Product Properties can be Described by Report ..............17 4-18 Offline Activation Trigger ....................17 5.

  • Page 3: Introduction

    1. Introduction Netvox Z309, an emergency button, acts as an End Device in ZigBee network. It does not perform permit-join function as a coordinator or a router for other devices to join the network. Users could simply push the button when asking for urgent assistance. Z309 will notify the central security unit, CIE (Control and Indicating Equipment) device, to send commands to a Warning Device to trigger alarm sound or lighting alert for immediate help.

  • Page 4: Specification

    The indicators will flash once, and the device is ready to be used. When Z309 is in a ZigBee network → the indicator will flash green 5 times. Turn it off: Long press the emergency button for 6 seconds (the red indicator will flash once after 6 seconds, and release it when the red indicator starts to flash).

  • Page 5: Join The Zigbee Network

    4-3 Join the ZigBee Network After Z309 is turned on, it will search for an existing ZigBee network and send a request to join the network automatically. While Z309 is under the coverage from a coordinator or a router whose permit-join feature is enabled, Z309 will be permitted to join the network.

  • Page 6: Trigger

    In the alarm command sent by Z309, the Alarm2 bit of Zone status is 1. After the registration is successful, press the emergency button for a short time, and Z309 sends an alarm command through ZigBee wireless network to trigger the registered CIE (If there is a cluster ID: 0x0500 bound to the device, it will also be sent to the bound device).

  • Page 7: Simple Positioning

    0 – ZoneStatusChange 4-6 Simple Positioning Z309 has a simple positioning function, that is, it reports the routing devices near the device to the target device bound with cluster ID: 0xFE60. After the registration is successful, press the emergency button for a short time, and Z309 sends an alarm command through ZigBee wireless network to trigger the registered CIE (if there is a cluster ID: 0x0500 bound to the device, it will also be sent to the bound device).

  • Page 8: Long-Time Inactivity Detection

    (see the following user-defined command format). If Z309 fails to register when the emergency button is pressed for a short time, it will start to register and report the RSSI value of the nearby routing device to the binding device.
  • Page 9 Time Synchronization Request The command is 0x99 (Z309 Coordinator) The command format is Bits:8 Transaction Frame Manufacturer Command Sequence control code identifier number 0x0D 0x109F 0x99 (Clusterid: 0xFE00) Time Synchronization Response The command is 0x99 (Z309 Coordinator) The command format is...
  • Page 10 0x9A (Clusterid: 0xFE00) Start Hour – byte – 0x16 (22) End Hour – byte –0x05 (05) Represent: 22:00-05:00 Set Interval Time of Stopping Inactivity-Detection Response The command is 0x9A (Z309 Coordinator) The command format is Bits:8 Transaction Frame Manufacturer Command...
  • Page 11 0x109F 0x9B (Clusterid: 0xFE00) Start Hour – byte – 0x16 (22) End Hour – byte – 0x05 (05) Represent: 22:00-05:00 Set Inactivity Period Request The command is 0x9C (Z309 Coordinator) The command format is Bits:8 Transaction Frame Manufacturer Command No Active...
  • Page 12 Status – byte – 0x00_ Success 0x01_Failure Get Inactivity Period Request The command is 0x9D (Z309 Coordinator) The command format is Bits:8 Transaction Frame Manufacturer Command Sequence control code identifier number 0x15 0x109F 0x9D (Clusterid: 0xFE00) Get Inactivity Period Response...
  • Page 13 0x15 0x109F 0x9F (Clusterid: 0xFE00) Get the Current Time Response The command is 0x9F (Z309 Coordinator) The command format is Bits:8 Transaction Frame Manufacturer Command Sequence Year Month Hour Minute Second control code identifier number 0x1D 0x109F 0x9F (Clusterid: 0xFE00) Year –...

  • Page 14: Product Active Status

    4-9 Restore to Factory Setting The Z309 has the function of saving data in case of power failure. Once it cannot be associated with its registered device or a new Zigbee network is to be added, the following operations need to be performed first to restore the saved data to the factory value.

  • Page 15: Low Battery

    Z309 to the specified CIE. (1) If Z309 has been registered on a CIE at this time, and the specified CIE is exactly this CIE, the red Z309 will send the unenroll command to the CIE when the registration is successful, delete its own information from the CIE, and the red indicator will flash 6 times to indicate success.

  • Page 16: Sleeping Mode

    Note: In order to save power, it is recommended to shut down the device if it is in case 2. 4-16 Home Automation Clusters for Z309 1. End Point(s): 0x01: 2. Device ID：IAS Zone0x0402） 3. EndPoint Cluster ID...
  • Page 17 8-bit integer Unsigned 0x0003 HWVersion 0x00 – 0xff Read only 0x01 8-bit integer Manufacturer Character 0x0004 0 – 32 bytes Read only netvox Name string Character 0x0005 ModelIdentifier 0 – 32 bytes Read only Z309E3ED string Character 0x0006 DateCode 0 – 16 bytes...

  • Page 18: Product Properties Can Be Described By Report

    Mandator Identifier Name Type Range Access Default Optional 8-bit Read / 0x0031 BatterySize 0x00 –0xff Enumeration write Unsigned 8-bit Read / 0x0033 BatteryQuantity 0x00 – 0xff integer write BatteryAlarm Read / 0x0035 Bitmap (8-bits) 0000 000x 0000 0000 write Mask BatteryVoltage Unsigned 8-bit Read /...

  • Page 19: Important Maintenance Instructions

    Manual activation: Press and hold the emergency button for 3 seconds. Release the button when the indicator flashes red once. Then release the button, and the device will immediately try to retrieve the network. Alarm triggering: In the off network state, press the button briefly to trigger the alarm, and the device will immediately try to retrieve the network.

  • Page 20: Description Of Waterproof Grade

    6. Description of Waterproof Grade 1: According to Enclosure Protection Class This standard is equivalent to IEC 60529:2001 Degrees of Protection Provided by Enclosures (IP Code) 2: The test method of IP65 waterproof grade is: spray the device in all directions under 12.5L/min water flow for 3min, and the internal electronic function is normal.

Table of Contents