Download Print this page
netvox R602B User Manual

netvox R602B User Manual

Wireless lora siren with rechargeable battery backup

Advertisement

Quick Links

Model: R602B
Wireless LoRa Siren with Rechargeable Battery Backup
Wireless Siren with
Rechargeable Battery Backup
R602B
User Manual
Copyright©Netvox Technology Co., Ltd.
This document contains proprietary technical information which is the property of NETVOX Technology. It shall
be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written
permission of NETVOX Technology. The specifications are subject to change without prior notice.

Advertisement

loading

Summary of Contents for netvox R602B

  • Page 1 User Manual Copyright©Netvox Technology Co., Ltd. This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written...
  • Page 2: Table Of Contents

    Table of Content 1. Introduction ......................2 2. Appearance ......................3 3. Main Features ...................... 3 4. Set up Instruction ....................4 5. Data Report ......................6 6. Installation and Precaution ................... 8 7. Important Maintenance Instruction ..............9...
  • Page 3: Introduction

    LoRaWAN protocol, and it can be controlled through AppServer. The R602B has five kinds of alarm sounds - fire/ emergency / burglar / doorbell /mute mode. After receiving an alarm, it will emit a high-brightness flash and an alarm sound, which can be applied to security-related scenes. The switch and mode can be customized, and only the alarm sound or the flashing light can be turned on, or both can be turned on.
  • Page 4: Appearance

    2. Appearance Alarm Indicator*6 Function Key DC in Network Indicator Battery Compartment Function Key 3. Main Features  Compatible with LoRaWAN  12V DC power supply  Backup 3 sections rechargeable AAA 1.2v NiMH batteries for power supply  Simple operation and setting ...
  • Page 5: Set Up Instruction

    When the device is not connected to the network, there is no indication. Remote Control The R602B can be controlled by sound and light alarms, and there are five alarm sounds that can be controlled are as follows: 1. Fire Mode Remote Control 2.
  • Page 6 Battery Backup Function 1. R602B supports a backup battery power supply. When the DC power supply and backup battery exist at the same time, the device will preferentially use the DC power supply for power supply.
  • Page 7: Data Report

    Maximum time: 0x0E10 (3600s) Minimum time: 0x0E10 (3600s) // Mintime and Maxtime must be set to the same report time. The reported data is decoded by the Netvox LoRaWAN Application Command document and http://cmddoc.netvoxcloud.com/cmddoc Data report configuration and sending period are as following:...
  • Page 8 MaxTime Reserved 0x01 ReportReq (2bytes Unit:s) (2bytes Unit:s) (5Byte,Fixed 0x00) Config Status Reserved 0x81 ReportRsp (0x00_success) (8Bytes,Fixed 0x00) ReadConfig Reserved R602B 0x02 0x69 ReportReq (9Bytes,Fixed 0x00) ReadConfig MinTime MaxTime Reserved 0x82 ReportRsp (2bytes Unit:s) (2bytes Unit:s) (5Byte,Fixed 0x00) WarningMode(1byte) StrobeMode(1byte)
  • Page 9: Installation And Precaution

    (1) Command Configuration: WarningMode= FireMode、StrobeMode= LedBlinkMode1、WarningDuration=10s Downlink:90690001000A0000000000 WarningMode= Doorbell 、StrobeMode= NoLedIndication、WarningDuration=10s Downlink:90690300000A0000000000 WarningMode= MuteMode、StrobeMode= LedBlinkMode1、WarningDuration=10s Downlink:90690401000A0000000000 Stopping sounds and flashing lights ( WarningMode= MuteMode、StrobeMode= NoLedIndication、WarningDuration=0s Downlink:9069040000000000000000 Setting MinTime / MaxTime = 300s = 5min //MinTime / MaxTime must equal. Downlink: 0169012C012C0000000000 012C (H = 300 (D Response: 8169000000000000000000 (Configuration success)
  • Page 10: Important Maintenance Instruction

    3. Insert the adapter output cable (included) interface into the R602B can be applied to the following scenarios: power interface (DC 12V) of the sound and light alarm, as 1.Family shown on the right. 2.Engine room The other end of the adapter is plugged into a traditional 3.School...