Xpose Mini Operation - RGBlink mini Quick Start Manual

XPOSE mini Operation

Install dedicated software named XPOSE to
control mini or mini+.
Right click the setup exe file .
Choose Run as administrator to open the
exe and install the software.
After software is installed, click the icon
XPOSE and login the software.
Click Search to search mini device.
After searching, all available mini devices in the
sub-net can be found, up to 128 devices can found
if there are.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
support@rgblink.com
|
www.rgblink.com
15 / 22