Advertisement
Step 1:
Unscrew the Mounting Bolt, (original
Screw in the Motorbike) from the
Right Side, Left Side and Front Side.
Step 3:
Orient the Bracket (5), and the
Bracket (12), as shown, and slip-in
the Bush Delrin (4)-2 off and Screw
M6x20 (7) – 2 off , and Screw M5x10
(8) – 2 off , and slip-in the Bush
Rubber (10) as shown .
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Step 2:
Orient the Bracket (3), as shown, and
slip-in the Bush Rubber (10) and
Screw M5x10 (8) – 2 off , and Screw
M5x20 (2) – 1 off , as shown .
Page 2
Advertisement
