Taring; Switch-Over Weighing Unit - KERN FOB-S Operating Manual

9.2 Taring

The dead weight of any weighing container may be tared away by pressing a button,
so that the following weighing procedures show the net weight of the goods to be
weighed.
Balance display
(example)
(Example FOB-NS)
(Example FOB-NL)

9.3 Switch-over weighing unit

According to the requirements the balance can be switched over into different units.
These are set in the menu.
In the weighing mode, press the UNIT key to toggle to the selected weighing units.

The available weighing units depend on the model and verification of the
balance, see chap.1 "Technical data".

When switching-on the balance, the unit in which the balance has been
switched off, will be displayed.
FOB-BA-e-2125
Operation
•
Deposit weighing container.
The weight of the container is displayed.
•
Press the TARE button, the zero display
disappears.
The weight of the container is now internally saved.
•
Place weighed items in the weighing container.
The net weight of the weighed items is displayed.
For L models, a triangle appears below the NET
symbol.
29