Raider RD-EBC02 User Manual page 13

1.26. In reversing the direction of movement on slopes be extra careful!
1.27. When you turn on the electric hair grass to watch your feet are safely away from moving parts.
1.28. Do not use the machine when barefoot or with sandals. Always use a strong, closed shoes
and long pants.
1.29. Switch off the circuit breaker and unplug from the electrical outlet is always:
when away from the machine;
before removing items blocking machine;
When checking, cleaning or working on the machine;
when the machine starts to vibrate abnormally strong.
after coming into contact with a foreign body immediately check the machine for damage before
it benefits provided for their removal;
1.30. The operator or user responsible for accidents, injuries to other persons or the environment
and caused material damage.
1.31. Electric hair grass is so designed that all moving parts and ensure safe housing
conditions of use. For damage caused by attempts to change the structure of the electric hair
grass manufacturer is not liable.
1.32. To ensure safety, should only use original spare parts or parts manufacturer.
1.33. Failure to follow the instructions may lead to electric shock, fire and / or serious injury.
2. Functional Description and purpose.
Electric hair handheld power tool with a second-grade insulation. It is powered by single phase
motor with collector ac and is designed for mowing grass at home. Do not allow the use of electric
hair grass for activities other than its intended purpose.
3. Assembling the components of the electric hair grass and commissioning.
Some parts of the hair are dismantled to reduce the volume of container during transport.
3.1. Install the fuse (8).
3.2. Mounting the saw blade or a trimmer head.
When mounting the cutting equipment is crucial to supporting flange gets right into the center
opening of the cutting equipment. Incorrectly mounted cutting equipment can lead to serious and
/ or dangerous injuries.
3.3. Mounting the knife.
Place the cutting blade /3/ on the locking flange /2/ so that the opening of the blade fits snugly
into the flange. Attach the washer /4/ with the flat part to the blade. Insert the washer /5/ and tighten
the nut /6/. Attention! The shaft thread is reversed. Use a 19mm insert. To lock the shaft, insert a
lever or a screwdriver with a diameter of Ø6 through the hole on the right side of the protective
sleeve. Turn the head until the lever enters the locking hole of the locking flange.
13