Preparation
2-4
Information about nameplate
The figure shows an example.
Driver model
Input speci cations
Output speci cations
The position describing the information may vary depending on the product.
2-5
Names and functions of parts
The figure shows the AZD-CPN.
Control power supply input terminals (CN1)
Electromagnetic brake terminals (CN1)
Regeneration resistor thermal input terminals (CN1)
Power removal signal input terminals (CN1)
Power removal monitor output terminals (CN1)
Regeneration resistor terminals (CN4)
Main power supply input terminals (CN4)
Protective Earth Terminals
20
Serial number
Encoder connector (CN2)
Motor connector (CN3)
CHARGE LED (Red)
Manufacturing date
PWR/ALM LED (Green/Red)
MS LED (Green/Red)
NS LED (Green/Red)
SW1, SW2 (Not used)
HOME PRESET switch
USB communication connector
L/A LEDs (Green)
PROFINET communication
connectors (CN5, CN6)
I/O signal connector (CN7)