Network Stack Configuration - Avalue Technology ECM-TGU User Manual

Table of Contents

Advertisement

ECM-TGU User's Manual
Device reset time-out
Device power-up delay
Mass Storage Devices

3.6.2.12 Network Stack Configuration

Item
Network Stack
50 ECM-TGU User's Manual
10 sec
20 sec[Default]
10 sec
20 sec[Default]
30 sec
40 sec
Auto[Default]
Manual
Auto[Default]
Floppy
Forced FDD
Hard Disk
CD-ROM
Options
Enabled
Disabled[Default]
USB mass storage device Start Unit command
time-out.
Maximum time the device will take before it
properly reports itself to the Host Controller.
'Auto' uses default value: for a Root port it is
100ms, for a Hub port the delay is taken form
Hub descriptor.
Mass storage device emulation type. 'AUTO'
enumerates devices according to their media
format. Optical drives are emulated as
'CDROM', drives with no media will be
emulated according to a drive type.
Description
Enable/Disable UEFI Network Stack.

Advertisement

Table of Contents
loading

Table of Contents