Advertisement
4.
Place a washer on the screw and insert the screw through the
lever assembly as shown in Figure 4.
5.
Place the second washer on the other end of the screw and thread
the lock nut (Figure 4).
6.
Tighten the screw and lock nut.
7.
Check the function of the new backrest adjustment lever. Confirm
the backrest can be adjusted to each locking position.
Repairs or Parts
EMSAR
is the only organization authorized by Ferno
®
to manage, service, and repair Ferno products.
Telephone (Toll-free)
Telephone (Worldwide)
Fax (Worldwide)
Internet
Ferno Customer Relations
For ordering assistance or general information:
CANADA AND THE U.S.A.
Telephone (Toll-free)
Telephone
Fax (Toll-free)
Fax
Internet
ALL OTHER LOCATIONS
For assistance or information, please contact your Ferno distributor.
If you do not have a Ferno distributor, please contact Ferno Customer
Relations:
Ferno-Washington, Inc., 70 Weil Way
Wilmington, Ohio 45177-9371, U.S.A.
Telephone
Fax
Internet
Limited Warranty Statement
The products sold by Ferno are covered by a limited warranty, which
is printed on all Ferno invoices. The complete terms and conditions of
the limited warranty, and the limitations of liability and disclaimers,
are also available upon request by calling Ferno at 1.800.733.3766 or
1.937.382.1451.
1.937.382.1451
44 (0) 1274 851999
© Ferno-Washington, Inc. / 234-3648-00 / December 2016
F2 Backrest Adjusting Lever Kit
1.800.73.EMSAR
1.937.383.1052
1.937.383.1051
www.EMSAR.com
1.877.733.0911
1.937.382.1451
1.888.388.1349
1.937.382.1191
www.ferno.com
+1.937.382.1451
+1.937.382.6569
www.ferno.com
Lock Nut
Washer
Screw
Washer
4
3
Advertisement
