Ethernet And Micro Usb Ports - Emerson FB3000 Instruction Manual

Ethernet and Micro USB Ports

Located on the top of the CPU module, the two Ethernet ports are standard 8-pin 10/100Base-T RJ -
45 8P8C sockets. Connect to an Ethernet switch using the appropriate Category 5 shielded patch
cable. The Micro A-B USB connector is located on the front of the module. The Micro A-B USB
connector is compatible with either Micro A USB or Micro B USB plugs, but is not compatible with
Micro C plugs. You can use the Micro A-B USB port for DNP3 slave communications. When
configuring the USB port, ignore baud rate and other settings; simply choose the correct COM port
and communicate as if using one of the serial ports.
Figure 2-27: Location of Ethernet Ports and Micro USB Port
1
2
3
Notes:
The default IP address for Ethernet port 1 is 192.168.1.10

The default IP address for Ethernet port 2 is 192.168.2.10

The default port is 20000

Installation
Ethernet Port 1
Ethernet Port 2
Micro A–B USB Port
Emerson FB3000 RTU Instruction Manual
D301851X012
May 2022
33