Removing Battery Saver Tabs; Connecting Power - Emerson FB3000 Instruction Manual

Emerson FB3000 RTU Instruction Manual
D301851X012
May 2022
2.7

Removing Battery Saver Tabs

When you are ready to install the RTU and place it into operation, you must remove the battery
saver tabs for the SRAM coin cell batteries. Each power module, as well as the CPU battery, has a
similar tab.
Grasp the tab with the "REMOVE BEFORE USE" label and pull the tab straight out.
Figure 2-12: Battery Saver Tab
2.8

Connecting Power

Power comes from an external power source. The device supports both 12V and 24V power
supplies. It accepts DC voltage from 10.5 to 30V; the amount of power required varies depending
upon the options used.
The RTU does not include an internal charger or other infrastructure to support a battery or
battery/solar power combination. If you choose to use a solar panel, you must provide your own
external charging mechanisms and connect to the external power terminals.
18 Installation