Table of Contents
Advertisement
Table 18 Date/time setup
Date/time setup
Date:
Date format:
Time:
Time format:
5.10.3 Facility info...
Facility info... allows loading of an image for display on the printout (optional thermal printer).
Figure 30
Once Facility info... is selected, a new screen appears as follows:
Figure 31
To load an image to the device, follow the instruction below for configuring the image correctly.
To create an image for use on the MA 28 printout:
1. Requires a minimum 32 MB USB flash drive.
2. Insert USB into PC and go to My Computer. Right click on the USB flash drive
and select "Format"
NOTE: This will erase everything on your USB thumb drive
8506915 Rev. 5
Description
Set the current date using the left dial (Masking Level dB) to cycle
through the fields. The right dial (Hearing Level dB) to make the field
selection. The Date format: is applied to the date selection.
Select the preferred date format to be displayed. Choose between:
DD/MM/YYYY, DD.MM.YYYY, MM/DD/YYY.
Set the hour and minute by using the time control. If time format
12 H is chosen a further setting is available for selection of AM/PM.
Select the preferred clock, using the 12 or 24 hour time format.
Operation Manual MA 28
37
05/05/2021
Advertisement
Table of Contents
