Maico MA 28 Operation Manual page 33

Hide thumbs Also See for MA 28:

Table of Contents

5.9.11 Transferring Test Results to PC (Extra License)

PC connection requires a specific license for connectivity. Review section 5.10.4 to

verify your device has this license. Before transferring data to a PC make sure that

you have installed the MAICO Sessions software properly according to the separately

delivered operation manual. Before establishing the PC connection you will have to

consider the recommendations given in section 4.2.4 in case the MA 28 is connected

to a non-medical device.

To transfer the data, make sure the device is connected to the PC via USB connection

and the MAICO Sessions is open. When connected, the Get Measurement (Figure

2624) button appears. Click on

are transferred and displayed on the PC screen.

Figure 26

NOTE:

• Upon results transferred to MAICO Sessions, the results are deleted from the

device.

• Transferring results from the internal database requires the use of MAICO

Sessions and OtoAccess

8506915 Rev. 5

Operation Manual MA 28

Get Measurement and the tone audiometry values

Database. Contact your distributor for further details.

05/05/2021

Table of Contents