Panasonic KX-HTS Series Manual page 48

3.3.1 Mother Board
Pin Assignments
LAN Port/WAN Port (10BASE-T/100BASE-TX)
No.
1
2
3
4-5
6
7-8
LAN Port/WAN Port (1000BASE-T)
No.
1
2
3
4
5
6
7
8
LED Indications
Indication
STATUS
Signal Name Input (I)/Output (O) Function
TPO+ O
TPO- O
TPI+ I
Reserved -
TPI- I
Reserved -
Signal Name Input (I)/Output (O) Function
TRD0 (+) I/O
TRD0 (-) I/O
TRD1 (+) I/O
TRD2 (+) I/O
TRD2 (-)
I/O
TRD1 (-) I/O
TRD3 (+)
I/O
TRD3 (-) I/O
Colour
Green
Amber
Red
Transmit data+
Transmit data-
Receive data+
-
Receive data-
-
Transmit and receive data 0 (+)
Transmit and receive data 0 (-)
Transmit and receive data 1 (+)
Transmit and receive data 2 (+)
Transmit and receive data 2 (-)
Transmit and receive data 1 (-)
Transmit and receive data 3 (+)
Transmit and receive data 3 (-)
Description
PBX status indication
• OFF: Power Off
• ON: Power On and running
• Flashing (60/minute): Starting up/Logging in
• Flashing (240/minute): During initialisation
• Flashing (240/minute): Wi-Fi Protected Setup (WPS) in progress
PBX status indication
• ON: Ready to shutdown
• Flashing (60/minute): Shutting down
• Flashing (240/minute): Initialize switch pressed
PBX status indication
• ON: Alarm
The cause may be one of the following:
– Alarm for an optional service card.
• Flashing (240/minute): Initialise failed