6.1.4 Restarting the PBX
6.1.4 Restarting the PBX
If the PBX does not operate properly, restart the PBX using Web Maintenance Console. Before restarting the
PBX, try the system feature again to confirm whether there definitely is a problem or not.
Note
• Restarting the PBX causes the following:
– Camp-on is cleared.
– Calls on hold are terminated.
– Calls on exclusive hold are terminated.
– Calls in progress are terminated.
– Call park is cleared.
Other data stored in memory, except the above, are not cleared.
Operation
For details about DHCP server setting, refer to
in the Programming Item List.
"Maintenance-[4-2]System Reset-◆System
Reset"