Storage; Storage Safety; Storing The Machine - Toro 23515 Operator's Manual

Storage

Storage Safety

•
Shut off the machine and wait for all moving parts
to stop before you leave the operator's position.
Disconnect the spark-plug wire, keep it away from
the plug to prevent accidental starting, and allow
the machine to cool before adjusting, fueling,
unclogging, servicing, cleaning, or storing the
machine.
•
Run the engine dry or remove the fuel with a hand
pump; never siphon the fuel. If you must drain the
fuel tank, do it outdoors.
•
Follow the instructions in this Operator's Manual
to safely unload, transport, and store the machine.
•
Do not store the machine with fuel in the fuel
tank inside a building where ignition sources are
present, such as hot water and space heaters and
clothes dryers. Allow the engine to cool before
storing the machine in an enclosure.
•
Always refer to the Operator's Manual for
important details if the machine is to be stored for
an extended period.

Storing the Machine

1. Raise the tines, stop the machine, shut off the
engine, and disconnect the spark-plug wire.
2. Wash dirt and grime from the entire machine;
refer to Cleaning the Machine (page
3. Service the air cleaner; refer to
Cleaner (page 23).
4. Grease the chains and floating tine assemblies;
refer to Lubrication (page
5. Change the engine oil; refer to
Engine Oil (page
6. Check and tighten all bolts, nuts, and screws.
Repair or replace any worn or damaged parts.
7. Paint all scratched or bare metal surfaces.
Note:
Paint is available from your authorized
Toro service dealer.
8. Store the machine in a clean, dry garage or
storage area.
9. Cover the machine to protect it and keep it clean.
40).
Servicing the Air
22).
Changing the
24).
41