Toro 23515 Operator's Manual page 33

Removing the Transaxle
Note:
Use 2 people or a second hoist to safely
remove the transaxle.
1. Remove the locknut (1/4 inch) that secures
the fitting of the traction-control cable to the
transaxle-control bracket, and separate the
cable from the bracket
Figure 50
1. Fitting (traction-control
cable)
2. Transaxle-control bracket
2. Loosen the flange locknut and capscrew that
secures the belt idler pulley to the frame of the
machine, move the idler pulley inboard, and
remove the belt from the transaxle pulley
51 and Figure 52).
Figure 51
1. Capscrew (belt idler pulley)
(Figure 50).
g372913
3. Locknut (1/4 inch)
(Figure
g372914
1. Belt
2. Transaxle pulley
3. Remove and retain the connecting link from
the wheel-drive-chain, and remove the chain
from the transaxle sprocket and the wheel-drive
sprocket (Figure
1. Transaxle sprocket
2. Wheel-drive sprocket
4. Loosen the carriage bolts and flange locknuts
that secure the idler sprockets for the tine-drive
chains at each side of the machine, and move
the sprocket away from the chain
33
Figure 52
3. Belt idler pulley
53).
Figure 53
3. Chain (wheel drive)
(Figure
g372916
g372919
54).