Port Range Mapping - Paradyne Hotwire 6212 User Manual

5.7.2 Port Range Mapping

The Port Range Mapping is used to set up the virtual server. A virtual server has two access
ports: public and private. The public port is the open port where Internet users access the
virtual server. The local port is the port on the LAN by which the virtual server is really
accessed. The public port is translated to the local port to access to the virtual server. Follow
the steps below to configure Static NAT Mapping.
STEP 1: Click on the Port Range Mapping tab on the NAT menu.
STEP 2: Click on Add to add a port range mapping entry.
6212-A2-GB20-20 July 2004 55