Table of Contents
Advertisement
Port Mapping
Use the Port Mapping screen to map multiple ports to a PVC and create bridging
groups. Each group will perform as an independent network.
Figure 5-27. Port Mapping
To create a new mapping group:
Figure 5-28. Creating a Port Mapping Entry
6212-A2-GB23-00
1. Click on Add. The Port Mapping Configuration screen appears.
2. Enter a unique Group name.
3. Select interfaces from the available interface list and add them to the grouped
interface list using the arrow buttons to create the required mapping of the
ports.
4. Click on Save/Apply.
September 2005
5. Advanced Setup
5-15
Advertisement
Table of Contents
