Configure - Paradyne Hotwire 6212 User Manual

Fill out the following fields and click on Apply to submit the settings.
Public Address
Public Port From
/Public Port To
Local Address
Local Port
From/Local Port To
Protocol
5.8

Configure

From the Configure page, you can configure LAN and WAN interfaces, VCC, PPPoE, PPPoA, DNS
& Default Gateway, and NAT.
56
This is the public address Internet users access.
Enter the public port range. These ports will be mapped or
redirected to the local ports of the virtual on the LAN.
Internet users access the virtual server via the public port.
Enter the IP address of the virtual server on the LAN.
Enter the local port range of the virtual server on the LAN.
Specify the protocol: TCP or UDP.
July 2004 6212-A2-GB20-20