Nat; Static Nat Mapping - Paradyne Hotwire 6212 User Manual

5.7

NAT

The NAT menu in the Advanced menu bar lets you set up Static NAT Mapping and Port Range
Mapping.

5.7.1 Static NAT Mapping

Static NAT Mapping allows a pool of local IP addresses to share a public IP address. It is a form
of NAT that maps multiple Private IP addresses to a single Public IP address. It allows several
virtually addressed workstations to share a single global address. PAT uses the TCP and UDP
port numbers to map multiple virtual addresses to a single global address.
Follow the steps below to configure the Static NAT Mapping:
STEP 1: Click on the Static Nat Mapping tab on the NAT menu.
STEP 2: Click on Add to add a new entry of the static Nat mapping. Fill out the following fields
and click on Apply.
STEP 3: The new entry will be listed in previous Static NAT Mapping list.
54 July 2004 6212-A2-GB20-20