Paradyne Hotwire 6212 User Manual page 45

To add an entry, click on the Add button, and enter the following parameters. Click Apply to
submit the settings.
Interface: eth0/usb0. This configures the interface that will provide the DHCP function.
By factory default, the entry for interface eth0 is defined with the gateway address
192.168.1.1. The entry for interface usb0 is defined with the gateway address
192.168.201.1.
Starting IP Address: The first IP address of the address pool in the DHCP server. Note
the IP address should be in the same subnet as the router's LAN IP address.
End IP Address: The last IP address of the address pool in the DHCP server. Note the IP
address should be in the same subnet as the router's LAN IP address.
Gateway: The gateway IP address.
Netmask: The subnet mask of the IP network.
DNS: The IP address of the Domain Name Server.
Lease Time (in Days): Upon login, the remote workstation will obtain an IP address.
This field defines the period of time that the workstation can use this IP address to access
the Internet.
6212-A2-GB20-20 July 2004 45