Communication Port - Paradyne FrameSaver 9783 Quick Reference

Ethernet Management
Select Ethernet Management to configure the router for user and management data on
the Ethernet interface.
Ethernet Management
Configuration Option
Status
IP Address
Subnet Mask
Default Gateway Address
Proxy ARP

Communication Port

Select Communication Port to configure the FrameSaver router's COM port.
Communication Port
Configuration Option
Port Use
When Port Use is set to Terminal:
Data Rate (Kbps)
Character Length
Parity
Stop Bits
Ignore Control Leads
Login Required
Port Access Level
Inactivity Timeout
Disconnect Time (Minutes)
When Port Use is set to Net Link:
IP Address
Subnet Mask
RIP
Settings
[Enable], Disable
001.000.000.000–223.255.255.255, [ Clear ]
[ 000.000.000.000 ]–255 . 255.255.255 , Clear
001.000.000.000–223.255.255.255, [ Clear ]
Enable, [ Disable ]
Settings
[ Terminal ], Net Link
9.6, 14.4, [ 19.2 ], 28.8, 38.4, 57.6, 115.2
7, [ 8 ]
[ None ], Even, Odd
[1], 2
[ Disable ], DTR
Enable, [ Disable ]
[ Level-1 ], Level-2, Level-3
[ Enable ], Disable
1–60 [ 10 ]
001.000.000.000–223.255.255.255, [ Clear ]
[ 000.000.000.000 ]–255 . 255.255.255 , Clear
[ None ], Standard_out
15
Default in [Bold]
Default in [Bold]