Table of Contents
Advertisement
Description
3.8.2
OSD Keyboard Control
The following keyboard commands are used to open and to exit the OSD:
Keyboard command
<Hotkey>, <o>
<ESC>
<Left Shift> + <ESC>
If the OSD is closed with one of the keyboard commands mentioned above, possible changes are not
saved. For information on saving changes, see configuration descriptions from chapter 5.5, from page 57.
The following keyboard commands are available for the navigation and configuration within the menus:
Keyboard command
<Cursor Left>
<Cursor Right>
<Cursor Up>
<Cursor Down>
<Page Up>
<Page Down>
<Tab>
<Left Shift> + <Tab>
<+>
<->
<Space>
<Enter>
<Esc>
30
Function
Open OSD
Exit OSD (in the main menu)
Exit OSD (within the menus)
Function
Input field: cursor left
In menus: next input field
Input field: cursor right
In menus: previous input field
In input fields: line up (with wrap around)
In menus: line up (without wrap around)
In input fields: line down (with wrap around)
In menus: line down (without wrap around)
Previous page in menus with more than one page
Next page in menus with more than one page
In menus with input fields: next input field
In menus with input fields: previous input field
Next option in selection fields
Previous option in selection fields
Switching in selection fields between two conditions, e. g. between ON / OFF or
Y (Yes) / N (No)
In menus with input fields: Save data
In menus: Select menu item
With buttons: Confirm selected button
In menus with input fields: Cancel data input without saving
In menus with selection fields: Go back to the superior menu
NOTICE
Draco MultiView 4K
60
Advertisement
Table of Contents
