Summary Of Keyboard Commands - Ihse Draco U-Switch User Manual

Draco U-Switch
8.4

Summary of Keyboard Commands

In the following you find a summary of keyboard commands that can be used in conjunction with the
U-Switch.
Keyboard Command
<Hot Key>, <c>,
<new Hot Key
code>, <Enter>
<Hot Key>, <c>,
<0>, <new Hot
Key>, <Enter>
<Right Shift>
+ <Del> within 5 s
after switching on the
CON Unit or plugging in
a keyboard
Keyboard Command
<current Hot
Key>, <o>, <x>,
<0>, <Enter>
<current Hot
Key>, <o>, <x>,
<1>, <Enter>
<current Hot
Key>, <o>, <x>,
<2>, <Enter>
<current Hot
Key>, <o>, <x>,
<3>, <Enter>
<current Hot
Key>, <o>, <x>,
<4>, <Enter>
<current Hot
Key>, <x>, <d>,
<Enter>
<current Hot
Key>, <x>, <e>,
<Enter>
<current Hot
Key>, <x>, <c>,
<Enter>
<current Hot
Key>, <x>, <m>,
<Enter>
Function
Change the Hot Key according to the predefined Hot Key table
Set a freely selectable Hot Key
Reset the Hot Key back to default settings
Mode
Mode 0 (deactivate the switching via mouse, mouse in absolute mode)
Mode 1 (horizontal: 4x1, mouse in absolute mode)
Mode 2 (block: 2x2, mouse in absolute mode)
Mode 3 (vertical: 1x4, mouse in absolute mode)
Mode 4 (free, individual layout, mouse in absolute mode)
Deactivate unused or non-connected ports
Reactivate unused or non-connected ports
Reactivate all unused or non-connected ports
Restrict the automatic switching of the Multi-Screen Control when using mode 1,
2, 3, or 4. The mouse cannot cross the display borders.
Operation
41