Paradyne COMSPHERE 3825Plus User Manual page 90

COMSPHERE 3825Plus Modem
P
P (Pulse dial), 4-4
part numbers, 2-1
password
Administration, 4-27
deletion (%SP=), 4-29
display (%SP), 4-29
DTE (%SD), 4-29
entry attempt limit, 4-30
entry wait time, 4-30
Originate Access, 4-27
Remote Access, 4-22
types, 4-27
VF (%SV), 4-29
VF plus DTE (%SB), 4-29
VF Prompt Type, 4-30
pin assignments
EIA-232-E, D-1
JM8 to RJ11 crossover cable, D-2
Power LED, B-1
power-up procedure, 2-4
primary channel, 5-1
Q
quiet answer, 4-4
R
R (Reverse dial), 4-4
recovering use of AT commands, 2-5
remote access (S55), 4-22
Remote Access Password, 4-22
Remote branch, 5-1
remote modem Top-Level menu, 5-2
Repeat Last Command (A/), 4-3
reset (ATZ), 4-7
Result Code Control (ATQ), 4-6
result codes, A-1
extended, 4-6
Result Codes Format (ATV), 4-6
return to command mode, 4-4
return to Online mode (ATO), 4-5
ring number (S0), 4-17
RTS Action (&R), 4-11
RTS-to-CTS Delay (S26), 4-19
S
S-registers
changing, 4-6
displaying, 4-6
list of, 4-17
S0 (Auto-Answer RIng Number), 4-17
S2 (Escape Character), 4-1, 4-17
S3 (Carriage Return Character), 4-17
Index-4
S4 (Line Feed Character), 4-18
S5 (Backspace Character), 4-18
S6 (Blind Dial Pause), 4-18
S7 (No Answer Timeout), 4-18
S8 ("," Pause Time), 4-18
S10 (No Carrier Disconnect), 4-18
S12 (Escape Guard Time), 4-1, 4-18
S14 (Asymmetric Rate Mode), 4-18
S18 (Test Timeout), 4-19
S26 (RTS-to-CTS Delay), 4-19
S39 (Receive Buffer Disconnect Delay), 4-19
S41 (Dial Line Rate), 4-20
S43 (V32bis Train), 4-20
S44 (Leased Line Rate), 4-21
S45 (Leased Line Transmit Level), 4-21
S48 (Leased Line Carrier On Level), 4-21
S49 (Transmit Buffer Disconnect Delay), 4-22
S55 (Access from Remote), 4-22
S56–S59 (Remote Access Password), 4-22
S62 (V.25bis Coding), 4-22
S63 (V.25bis Idle Character), 4-23
S64 (V.25bis New Line Character), 4-23
S65 (Line Current Disconnect), 4-23
S66 (NMS Call Messages), 4-23
S67 (Callback Security), 4-30
S68 (Answer Security), 4-30
S69 (Make Busy Via DTR), 4-23
S70 (Originate Security), 4-30
S74 (Network Position Identifier), 4-24
S75 (Network Management Address), 4-24
S76 (V.32bis Autorate – Dial Line), 4-24
S77 (DTR Alarm Reporting), 4-24
S78 (V.32bis Automode), 4-24
S80 (No Data Disconnect Trigger Signal), 4-25
S82 (V.32bis Autorate – Leased Line), 4-25
S84 (AT Command Mode), 4-25
S85 (Fast Disconnect), 4-25
S88 (Straps When Disconnected), 4-25
S89 (V.42 ARQ Window Size Increase), 4-26
S90 (DTE Rate = VF Rate), 4-26
S91 (Cellular Enhancements), 4-26
S92 (V.29 Train On Data), 4-26
S94 (Entry Wait Time), 4-30
S95 (VF Prompt Type), 4-30
S96 (DTE Password Entry Attempt Limit), 4-30
S97 (DTE Password Termination Character), 4-31
S98 (DTE Password Backspace Character), 4-31
secondary channel, 5-1
security
Administration Password, 4-29
clearing passwords, 4-29
displaying passwords, 4-29
DTE password, 4-27
DTE type password, 4-29
reset (%SR), 4-29
selecting Answer Security type (S68), 4-30
VF and DTE, 4-27
VF password, 4-27
VF plus DTE, 4-29
VF type password, 4-29
VF with DTE, 4-27
November 1996 3825-A2-GB30-10