Paradyne COMSPHERE 3825Plus User Manual page 2

User's guide
Hide thumbs Also See for COMSPHERE 3825Plus:
Table of Contents

Advertisement

Quick Installation for the COMSPHERE 3825 Plus Modem
A. Get your modem ready:
Your modem needs a serial cable to connect it to your computer. One end must have
a 25-pin plug, and the other end must have a socket that matches the modem port
on your computer.
This is a 25-pin
or a 9-pin
connector.
Plug the transformer at the
other end of the power
cord into a 110 Vac power
outlet. Turn on your
modem and your PC.
B. Get your QuickLink II Fax software ready:
1. Insert the QuickLink II Fax disk into your disk drive.
2. From the Microsoft Windows Program Manager, select File
a:install (or b:install, if you are using drive B) at the command line. (Under DOS, type
at the C:\>prompt.) Press Enter.
3. Follow the instructions the install program displays on your screen. Let the Auto Detect
feature determine which COM port you are using.
C. Get yourself ready!
You are now all set to explore a world of information and entertainment. Use QuickLink II Fax
to send and receive faxes, or to dial Bulletin Board Systems and friends. Subscribe to online
services like CompuServe, GEnie, and America Online. Connect with a few of the millions of
people with computers and fax machines.
If you have questions about your modem, refer to page A for contact information.
Plug the serial cable
into your modem.
Plug the small power
connector into the
modem jack marked
POWER.
Plug the serial cable into the
serial port of your PC.
Plug your phone into the modem jack
marked PHONE.
Take one end of the line cord
(included with your modem) and
plug it into the modem jack
marked LINE. (See your User's
Guide for information about
leased-line connections.)
Take the other end of the line cable and
plug it into your telephone wall outlet.
Run, and then type

Advertisement

Table of Contents
loading

Table of Contents