Paradyne COMSPHERE 3825Plus User Manual page 28

H n Hook Switch Control
Allows the modem to go off-hook or on-hook.
H, H0 Modem goes on-hook.
H1 Modem goes off-hook.
I n Identification
Provides useful information when upgrading or servicing the product.
I, I0 Displays product code (default is 144).
Displays 3-digit firmware revision number.
I1
I2 Performs an EPROM check.
Displays serial number.
I3
I4 Displays model number.
Displays hardware part number.
I5
I6 Displays software part number.
Displays 3-digit firmware revision number (same as I1).
I9
Allows you to change the value displayed by I0:
I10
I10=0 causes I0 to display 144 (default).
I10=1 causes I0 to display 240.
I10=2 causes I0 to display 480.
I10=3 causes I0 to display 960.
I10=4 causes I0 to display 120.
I11 Displays the program memory checksum.
Displays the last eight critical errors; the first is the most recent. (Support personnel use only.)
I17
I19 Displays the entire firmware revision number.
L n Speaker Volume
Adjusts speaker volume.
L, L0 Selects low volume.
L1 Selects low volume.
L2 Selects medium volume.
L3 Selects high volume.
M n Speaker On/Off
Turns speaker on and off.
3825-A2-GB30-20
Table 4-1
(3 of 14)
3825 Plus AT Commands
November 1996
AT Commands and S-Registers
4-5