Connecting To The Power Supply - Kenmore 796.5197 Series Use & Care Manual

INSTALLATION INSTRUCTIONS

CONNECTING TO THE POWER SUPPLY

The washer should be plugged into a 120 VAC, 60 Hz,
3-prong (grounded) outlet. Plug in the washer.
WARNING:
• Improper connection of the equipment grounding
conductor can result in risk of electric shock. Check
with a qualifi ed electrician or service technician if there
is doubt that the outlet is properly grounded. Do not
modify the plug provided with the appliance. Never
damage or cut off the ground prong of the power
cord. If the cord does not fi t the outlet, have a proper
outlet installed by a qualifi ed electrician. Failure to
follow these warnings can result in serious injury, fi re,
electric shock, or death.
WARNING:
• The power outlet must be within 60 inches (1.5 m) of
either side of the washer.
• The appliance and outlet must be positioned so that
the plug is easily accessible.
• Plug the washer into an electrical outlet which
has a voltage rating that matches the rating plate.
For best performance, plug the washer into its own
individual outlet. This helps prevent overloading house
wiring circuits which could cause a fi re hazard from
overheated wires. If necessary, use a new, UL-listed
3-prong adapter or 3-wire extension cord with a
3-prong (grounding) plug rated at no less than the
branch circuit. Do not use an extension cord longer
than three feet. Failure to follow these warnings can
cause serious injury, fi re, electric shock, or death.
• The outlet must be grounded in accordance with current
wiring codes and regulations.
• Time-delay fuse or circuit breaker is recommended.
• It is the personal responsibility and obligation of the product
owner to have a proper outlet installed by a qualifi ed
electrician.
• Do not use a worn or damaged power cord or power plug.
Replace or repair it immediately. Failure to do so may
result in death, fi re, electric shock, or malfunction.
• Do not modify the power cord and take care not to
damage it when installing or moving the washing
machine. Failure to do so may result in death, fi re, electric
shock, or malfunction.
• Make sure that the washing machine is grounded.
• Connect this washing machine to a grounded outlet
conforming to the rating prior to use. Failure to do so may
result in fi re, electric shock, or malfunction.
• Do not damage or cut off the ground prong of the power
cord. Doing so may cause death, fi re, electric shock, or
product malfunction.
14