Step 2: Bench-Test Configuration; Connect Video And Power Cables - HIS -ML23.8 A Series User Manual

Installation Instructions

Step 2: Bench-test Configuration

Make sure everything works before installing into the production environment.

TIP!
If using a KVM extender, please refer to the installation instructions included
with the KVM extender module. It is particularly important to bench-test the full
configuration prior to final installation. This will help to identify and troubleshoot
any system issues while configuration changes may still be easily made.

Connect Video and Power Cables

All monitors are shipped with a VGA to DVI video cable, a VGA to DVI adapter, and a power/
mains cable� The cable ports are located on the rear of the monitor�
Video Connection
DisplayPort connections are supported natively with the integrated DisplayPort connector.
Optional adapters are available for Mini DisplayPort.
An integrated DVI-I connector is used to support both digital (DVI, HDMI) and analog (VGA, RGB)
signals through the same port. VGA signals require use of the provided VGA to DVI adapter.
RGB video sources (BNC, RCA) require additional adapters. HDMI (including Mini and Micro)
can also use the DVI-I port using an adapter.
8 ML23.8 User Manual, 99182A, April 2022
POWER INPUTS
DISPLAYPORT VIDEO
(for Touch Screen option)
USB
SERIAL (RS-232)
DVI VIDEO
(HDMI and VGA via Adapter)