Barco IEX Series Product Manual page 9

1.3 Important warnings
Important warnings:
Risk of electric shock:
Do not open. To reduce the risk of electric shock, do not remove LED board from tile.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
Maximum and minimum ambient temperature:
The maximum ambient temperature for the LED wall is 40°C (104°F), the minimum
temperature is -10°C (14°F).
Low Voltage Surge Protection Device required
Due to the damaging effects of lightning, utility switching and switching electric motors
of other users on the mains, this product needs to be protected by means of a Surge
Protection Device. This product is connected to the mains through a power distribution
box from another party, please verify that a Low Voltage Surge Protection Device
according EN61643-11 or UL 1449 is in place.
High leakage current:
The combination of multiple tiles in an installation results in increased levels of leakage
current. In order to avoid risk of electric shock due to high leakage current, proper
grounding of the installation is required.
Flammable materials:
Keep flammable materials away from the installation (such as curtains). A lot of energy
is transferred into heat. The installation should be such that the amount of air flow
required for safe operation of the equipment is not compromised. Proper ventilation
must be provided.
Risk of electric shock / Risk of fire:
Use single-phase power supply for an LED display with the total power consumption
not exceeding 3 kW, and three-phase power supply for an LED display with the total
power consumption exceeding 3 kW.
Each power source cable should be protected by a circuit breaker or fuses rated 16 A /
250 VAC (15 A / 250 VAC in the USA and Canada). Note that one tile requires 100-240
VAC, 50-60 Hz.
R5915190 /00 IEX
8 IEX SERIES