Barco IEX Series Product Manual page 7

for incorrect, inadequate, irresponsible or unsafe assembly of systems. The system
must comply with the local safety regulations regarding environmental conditions,
solidity final construction, etc...
Notice on safety
This equipment is built in accordance with the requirements of the international safety
standards IEC 62368-1, which are the safety standards of information technology
equipment including electrical business equipment. These safety standards impose
important requirements on the use of safety critical components, materials and
insulation, in order to protect the user or operator against risk of electric shock and
energy hazard and having access to live parts. Safety standards also impose limits to
the internal and external temperature rises, radiation levels, mechanical stability and
strength, enclosure construction and protection against the risk of fire. Simulated single
fault condition testing ensures the safety of the equipment to the user even when the
equipment's normal operation fails.
Product care
Structural & mounting components should be kept dry, clean, lubricated (only if
recommended), coated properly, and otherwise maintained in a manner consistent with
part design. Barco products must be used in a manner consistent with their design and
inspected on a routine basis for security, wear, deformation, corrosion and any other
circumstances that may affect the load handling capability of the part.
Barco recommends inspections at regular intervals for all installations and increasing
in frequency for more critical installations. If a part is found to have damage, which
may cause a decrease in load capability, the part must be removed for service or
replaced immediately.
Under no circumstances are Barco parts repairable by anyone other than Barco.
R5915190 /00 IEX
6 IEX SERIES