Barco IEX Series Product Manual page 8

1.2 Important safety instructions
Instructions:
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Clean only with materials or chemicals that are inert, nonabrasive, noncorrosive and
non-marking. Consult the manufacturer for further advice should any doubts exist
regarding any cleaning procedure.
• Do not block ventilation openings. Install in accordance with the manufacturers
instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding type plugs/sockets. If
the provided sockets/plugs are damaged then replacement of the defective parts must
be undertaken immediately.
• Protect the power/data cords from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus. Replace
damaged power/data cords immediately.
• Only use attachments/accessories specified by the manufacturer.
• Disconnect the power to this apparatus during lightning storms or provide suitable
additional lightning protection. Unplug this apparatus when unused for long period of
time.
• Refer all servicing to qualified service technicians/personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, the apparatus does not operate normally, or has been dropped.
• Use only with systems or peripherals specified by the manufacturer, or sold with the
apparatus. Use caution during lifting/moving or transporting to avoid damage by
possible tipping.
• Do not use damaged LED tiles. Replace damaged parts immediately.
R5915190 /00 IEX
7 IEX SERIES