Barco IEX Series Product Manual page 13

Hide thumbs Also See for IEX Series:
Table of Contents

Advertisement

• No force can be applied to the LEDs. Any LEDs damaged due to mechanical stress
are not covered by the warranty.
• Safety and functional features of the display cannot be defeated.
• It is not allowed to climb or hang any additional equipment on the back of an IEX
wall. Nothing is to be allowed to hang from the cables of an IEX tile.
• Any failures must be immediately and appropriately dealt with (equipment returned
to Barco). Failing equipment cannot be left to run in a wall.
• No additional tools (hammers, pry-bars, etc.) are to be used to force handles or locks
into place. All moving parts should be managed by hand.
• Only Barco cables specified to be used with the IEX display are to be used to connect
components in the IEX wall. Further, care must be taken to connect signal only
according to the installation manual.
• IEX tiles are not to be used in the vicinity of any equipment that is not CE and UL/ETL
certified.
• When reconnecting components in an IEX tile, care must be taken to ensure that
cables are carefully routed according to the installation manual to prevent damage to
the cables or other parts of the IEX tile.
• IEX tiles can be cleaned only in accordance to the procedures defined in the
installation manual.
• The IEX display is an indoor product. Use the IEX tiles only in a dry area away from
direct sunlight, dust and moisture. Never install and use the IEX tiles in an outdoor
environment.
• Ensure rigging hardware is able to handle the weight of the entire IEX with
appropriate safety factors.
• Ensure good ventilation for the LED display when designing the heat dissipation
solution
• Switch off the power immediately and contact the professional personnel when the
LED display has any abnormal conditions such as peculiar smell, smoke, electric
leakage, and abnormal temperature.
• In case the LED display is not been powered on twice a per week for at least 2 hours
each time then the "Warm up procedure" as described in Chapter 5.4 has to be followed
precisely.
R5915190 /00
IEX
12
IEX SERIES

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iex1.2Iex1.5Iex1.8Iex2.5

Table of Contents