Barco IEX Series Product Manual page 41

Figure 3-20 Selecting Cabinet for the New Module
2） Choose Display Mode to Modules. Select the position of the new module and
click Next.
Figure 3-21 Selecting Position of New Module
Module Size：Set the size of the module in a cabinet. The software determines each
module arrangement based on module size and cabinet size.
3） Adjust the coefficients (similar to the steps of coefficient adjustment in setting
coefficients for a new scan board). For details, refer to Step 2 and Step 3 in Section
3.5.1).
R5915190 /00 IEX
40 IEX SERIES