Barco IEX Series Product Manual page 14

• Installing the LED display in the following places may result in an equipment failure
and reduce its lifespan: near the sea, in an area with salt and alkali or sulphurous gases,
near a kitchen exhaust position, or at a place where the difference between indoor and
outdoor temperatures is great. Consult our professional personnel at the service center
if the LED display must be installed in any of these places.
1.5 LED Display Humidity precautions
Overview
LED displays have recommended temperature and humidity ranges for storage and
operation. Use of the products in temperature or humidity ranges outside these
recommendations can cause temporary or permanent damages.
The SMD LEDs used on indoor LED displays are moisture sensitive components, the
smaller the size of the LEDs, the more sensitive the LEDs are for humidity due to their
structure and electric clearance, specifically a chip LED (used for pixel pitches of sub
2mm) is highly sensitive.
When the humidity is high, it might cause condensation on and in the LED.
Condensation on the LED is dangerous and can cause shortcircuits, dead LEDs and
other issues.
Therefore, customers should strictly follow the humidity precautions and start up
procedure when using the screen.
R5915190 /00 IEX
13 IEX SERIES