KYMCO MXU 700i Owner's Manual page 59

5.1.1. Drive Select Lever Adjustment
1. Turn the ignition switch OFF and make sure the
engine stop.
2. Remove fasteners, and then remove the right/left
side cover.
3. Shift the transmission into neutral. Verify the
length of the right shift rod is 150mm (+/- 0.5mm).
To adjust the length by loosening the lock nuts (1)
and rotating the right shift rod (2) until you
achieve the proper length (150mm) then tighten
both locknuts firmly.
150mm (+/- 0.5mm)
51