Accessory Socket - KYMCO MXU 700i Owner's Manual

4.24. ACCESSORY SOCKET

The accessory socket (1) is attached to the left side
of the meter cover. You can use the accessory
socket to power a trouble light, spotlight, radio, or
cell phone, etc.
CAUTION
Do not plug in any heat-generating accessory such
as an automobile cigarette lighter because it can
damage the socket.
Be careful not to flood this accessory socket when
washing your ATV.
To use the accessory socket:
Turn the ignition switch ON, then start the
1.
engine.
Turn the headlights OFF.
2.
3. Open the accessory socket cap (2), and then
insert the accessory power plug into the
socket.
Be sure the engine is on and the headlights are
turned off before using the accessory socket,
otherwise you may drain the battery.
The accessory socket's rated capacity is DC 12V,
120 Watts (10A) or less. If you exceed this limit, you
may blow a fuse.
When you are done using an accessory, unplug it,
and cover the socket with the cap.
Accessory socket
(1)
(2) Cap
47