Installation - Shimano INTER 5E Service Manual

INSTALLATION

Refer to the internal geared hub-compatible SHIMANO STEPS dealer's manual for information on installing parts not listed in this document.
Installation of sprocket to the hub
(x)
(A)
(B)
(C)
(D)
Click here for the latest Dealer's Manual
https://si.shimano.com/DM/CASG003
Dealer's Manual
(SG-C7050-5V / SG-C7050-5R / SG-C7050-5C / SG-C7050-5D)
Place right-hand dust cap onto the driver
(y)
on the right side of the hub body.
Next, install the sprocket and secure it in
place with the snap ring.
(x)
(y)
(z)
(z)
Outward assembling: MU-UR510
only
Inward assembling: Compatible
with all motor units
Note the direction
Return to index page
(A)
Snap ring
(B)
Sprocket
(C)
Right-hand dust cap C
(D)
Driver
NOTICE
•
Only SM-C7050 and CS-C7000 can be used
with SG-C7050.
•
If using the MU-UR510 motor unit, outward
assembling of the sprocket is possible.
30