Table of Contents
Advertisement
Figure 10-5: OLTC Motor Torque Total Time (%)
2.
The adjacent box should list All limits as shown in Figure 10-6. If not, select the
'Alerts' dropdown menu and choose All limits.
Figure 10-6: OLTC Motor Torque Total Time (%) – Alerts Off
3.
For each Alert, use the slider control to slide the Alert to the Off position as shown
in Figure 10-6.
Now repeat these steps for all remaining alarms (in the same manner as above):
4.
Select OLTC Motor Torque In-Rush Time (%) from the Alarm source dropdown
menu.
5.
The adjacent box should list All limits. If not, select the 'Alerts' dropdown menu
and choose All limits.
6.
For each Alert, use the slider control to slide the Alert to the Off position.
7.
Select OLTC Motor Torque Maximum 1 (%) from the Alarm source dropdown
menu.
8.
The adjacent box should list All limits. If not, select the 'Alerts' dropdown menu
and choose All limits.
9.
For each Alert, use the slider control to slide the Alert to the Off position.
10.
Select OLTC Motor Torque Maximum 2 (%) from the Alarm source dropdown
menu.
MA-041 – DGA 900 Plus - Installation & Commissioning Manual - Rev 1.1
4-Mar-22
Page 76 of 99
Hide quick links:
Advertisement
Table of Contents
