Table of Contents
Advertisement
8.2
Motor Power Converter
The active power measuring converter module as shown in Figure 8-3 is wired in line
with the OLTC motor in the relevant control cabinet and provides a 4-20 mA output.
Figure 8-3: Power Converter
The specification and dimensions for the Power Converter are shown in Figure 8-4.
Figure 8-4: Power Converter – specifications & dimensions
The connection point of the tap changer power converter is typically located in the OLTC
control cabinet close to the motor.
Note:
The wiring of the tap changer motor drive must be extended to accommodate
the Power converter.
MA-040 – DGA 900 Plus - Operator Guide - Rev 1.1
4-Mar-22
Page 30 of 99
Hide quick links:
Advertisement
Table of Contents
