AJAX FireProtect User Manual page 5

Fire Alarm command for this button in the KeyPad/KeyPad Plus settings.
If smoke and/or temperature levels do not restore to normal values, in 10 minutes,
the FireProtect/FireProtect Plus turns on the siren again.
Connecting the Detector to the Ajax Security System
Connecting to the hub
Before starting connection:
1. Following the hub user guide, install the
hub, and create at least one room.
2. Switch on the hub and check the internet connection (via Ethernet cable and/or
GSM network).
3. Make sure that the hub is disarmed and does not update by checking its status
in the Ajax app.
Only users with administrator rights can add the device to the hub
Pairing the detector with hub:
1. Select Add Device in the Ajax app.
2. Name the device, scan or type the QR Code (located on the detector body and
packaging), and select the location room.
Ajax app . Create the account, add the