Maintenance; License; Version - EDAN Acclarix LX9 Series User Manual

Acclarix LX9 Series Diagnostic Ultrasound System User Manual

TLS: Sets whether to use TLS protocol to encrypt the FTP transfer.

Port: Sets the port number of FTP server.
Testing the server: There are two tests to ensure that the server information is entered correctly.
Click on any field for a given server to make that server selected, then:

Ping: A successful Ping means that the system can communicate with the FTP server at
a low-level; basically that the two computers „see‟ each other. As a security measure,
some servers on the Internet may be configured to not respond to a Ping even if the
connection is successful.

Connect: A successful Connect means that the system can communicate with the FTP
server, and FTP transfers will work. If this fails but Ping works it could mean:
o
The destination computer is not correctly configured as an FTP server.
o
The password on the server has changed. Use Edit to re-enter the password.
o
The Shared Directory does not exist. Use Edit to confirm the directory.
Other Controls

Add: Adds another line in the list of servers. This automatically invokes Edit.

Edit: Available when an FTP Server has been selected. This invokes a dialog that edits
the IP address, name, directory, and password.

Delete: Available when an FTP Server has been selected. This deletes the selected
server.

10.7 Maintenance

Entering Maintenance Screen:
Press Utilities-> Maintenance touch screen buttons to access Maintenance screens.

10.7.1. License

The License page displays which features are currently licensed for use on the system. At the top of
the screen is displayed the current license key. Below that is a list of all licensable features, along with
its current status. The system supports temporary trial licenses. Click the Trail button can try the
function for one time in the valid period of three months. If a feature is so licensed the expiration date
is also shown.

Press Import button to import a license file from a USB external storage device.

Press Revert button to restore the previous license if the imported license is not correct.
Please contact your distributor or Edan service engineer to obtain a new license key.

10.7.2. Version

The Version screen shows the current version of software, firmware, and selected hardware for the
system. This information is only needed if requested by an Edan service engineer. This page also
includes an Upgrade, Import Config and Show Config and Fan status button. Any released
upgrade will include instructions regarding use of this button.

Press Upgrade button to upgrade the system software;

Press Import Config and Show Config buttons to import configuration files and check the on/ off
status of each software function.

Press Fan status button to view the fan status information.
- 205
-
Utilities