KeyWest Technology MegaHertz The Protector Operation Manual page 21

Protector Operation Manual
MegaHertz
If that is all correct, click on the SET button, just to the right of the white boxes we just set up.
You will now see a small form that asks you which event to set this information as. Select
EVENT 1, and then click ENTER on this form (fig. 18).
Figure 18
The information you entered in the white boxes should now be transposed to the EVENT
CONTROLLER EVENT 1 line. The numbered box to the left of EVENT 1 line should now be
green (this indicates that the event is active, that you intend for the protector to run this command
at the set time and day) (fig. 19).
The light yellow boxes in EVENT 1 line should remain yellow with the exception of the DATE
box, which should now be gray, and will read not selected—indicating that we are not
programming a specific date event, but an everyday event.
Figure 19
Keywest Technology
21
th
14563 W. 96 Terrace
Lenexa, Kansas 66215
10 July 2000
800.331.2019
www.keywesttechnology.com