KeyWest Technology MegaHertz The Protector Operation Manual page 19

Protector Operation Manual
MegaHertz
Move to the next white box, the EVENT TIME box. Since you are setting the on event first,
you'll want to select the time in this box at which you want the Protector to begin compressing
the local ad (this should be the time when the national ticker begins in your area). We'll use 5:00
AM for this example, but you can set it to any desired time for your locale. Change the time in
this EVENT TIME box by placing the cursor over the hours, minutes, seconds, or AM/PM
consecutively. Use the up and down arrows that are part of this box to change the event time to
your desired time. Ensure your AM/PM is set correctly (fig. 14)!
Figure 14
Once you have the proper "on" time set, move to the EVENT MONTH box. For normal ticker
operations, you'll want to set this at EVERY MONTH by pressing the down arrow on this box,
and clicking on EVERY MONTH. You want this setting of course, because the ticker happens
every month (fig. 15).
Figure 15
Keywest Technology
19
th
14563 W. 96 Terrace
Lenexa, Kansas 66215
10 July 2000
800.331.2019
www.keywesttechnology.com